Creativity

It’s time for a new challenge over at Try it on Tuesday, so for the next two weeks our challenge is Powder your …

 We are asking that you use powders on your creations; these could be Embossing, Mica, Infusions, Perfect Pearls, Brusho, paint powder or even just images of powders. Please remember to note on your post what ‘powder’ you have used.

There are some amazing creations from my Design Teamies too, please pop over to our blog to check them out. I can’t wait to see how you use powders on your creations too!

I had so much fun using both Brusho and embossing powders to create all the elements on my industrial style art journal page.

I started by using a new technique for the background by stamping a steampunk stamp from Docrafts onto my page using a Versamark Watermark stamp pad. Then I sprinkled Sandstone, Dark Brown, Terracotta and Yellow Ochre Colourcraft Brusho Powders onto the page and used a soft paintbrush to lightly brush the powder over the stamping so the Watermark ink was covered with the Brusho powders.

I then spritzed the page lightly with water a few times and watched the background colours burst to life until the stamping was defined but not totally lost by adding too much water – such a fun technique!

The light bulbs and cogs/gears are Boozybear chipboard pieces which I covered using the Versamark Watermark ink and then some Gold Shellac and Black Papermania embossing powder. I heated the pieces with my heat gun until the embossing powder melted and became glossy and dimensional. For the light bulb backgrounds, I added some Yellow and Yellow Ochre Brusho Powders to a sheet of white paper and spritzed with water. When dry I drew around the light bulbs shapes and cut these shapes out of the paper.

I stuck the yellow backgrounds behind each of the embossed light bulbs using a Zig Memory System glue pen and stuck them and the cogs onto the page using glossy accents. The panel of words is a Tim Holtz Pocket card which I edged using the Versamark ink and embossing powders; it reads “Creativity is seeing things everyone else has seen, and thinking what no one else has ever thought”. I also covered three metal brads with the Gold Shellac and Black embossing powders and added them to the panel to give it more of an industrial look, which finished the page.

As T Stands for Tuesday and to continue the industrial look of my page I’m sharing a photo of me and hubby at the Banded Brewing Tap Room in Biddeford, Maine when we were on holiday last year – Happy T Day!

We had the “Flight of 4 Tasters” and the beers we tried were Oktoberfest, Veridian, Wheat ‘N’ Potatoes and Greenwarden – cheers!

Challenges 

I’m pleased to be able to join the lovely Rike from rike’s art and her The Colour Yellow challenge over at Art Journal Journey with my yellow lightbulbs.

Over at Simon Says Stamp Monday Challenge, their theme is Things with Wheels, so I’m pleased to join in the fun with the cogs and gears, that make wheels go round, which I added to my page.

I’m also joining in the Anything Goes – Steampunk/Industrial fun over at Sandee & amilie’s Steampunk Challenge with my industrial style page.

Thanks for joining me today! If you have any questions or comments, I would love to hear from you.

Here is a list of all the materials used to create this art journal page:

  • Tsukineko Versamerk (Watermark Stamp Pad)
  • Colourcraft Brusho Colours (Sandstone, Dark Brown, Terracotta, Yellow Ochre, Yellow)
  • Docrafts Creativity Essentials A5 clear stamp set (Steampunk Background DCE907128)
  • Papermania Embossing Powder (Gold Shellac, Black)
  • Boozybear Chipboard Pieces (Light Bulbs, Cogs & Gears)
  • Tim Holtz idea-ology (Pocket Cards #TH93208)
  • Craft Sensations (Brads CRO550/A)
  • Zig Memory System 2 Way Glue (Dual Action Glue Pen)
  • Ranger Glossy Accents
Advertisements

Time Flies

Our new challenge for the next two weeks over at Try it on Tuesday is Time Flies.

I hope you will join in the fun and for more inspiration please take a look at the amazing creations of my fabulous Design Team teamies over at our blog. A special welcome to Erika who has joined our Design Team too!

For this challenge I had fun creating a steampunk style page using some wonderful chipboard pieces from Boozybear – I hope you like it!

I started by adding Antique Linen, Ground Espresso and Rusty Hinge Distress Ink to the page by applying the ink pads to a blending mat, spritzing with water and then pressing the mat onto the page. To tie into the Time Flies theme, I selected some stamps with months, days and dates on them from a Documented stamp set by Tim Holtz and stamped them over the background using black Versafine Ink. Then I added some numbers and texture using a stencil by Carabelle Studios and Black Soot Distress Ink. To tone the background colours down a bit, I added some Neutral Grey Liquitex Heavy Body Acrylic using a palette knife and also stencilled Pébéo white gesso over the page using a sponge through an Abstract Grid stencil by That’s Crafty.

For the winged clock, I used chipboard pieces which included a Wind Up Gear, some cogs and gears, and also two steampunk wings from Boozybear that I won over at Sandee & Ameile’s challenge – thank you! I stuck the wings in place behind the clock face of the Wind Up Gear piece and layered some cogs over the top using Liquitex Matte Gel Medium. When dry, I added some brads to the centre of a couple of the gears and then I painted the whole piece using Iridescent Bright Gold Liquitex Ink. Next I covered it with some VersaMark Watermark Ink and Aged Silver Embossing Enamel which I heated with my heat gun until it turned glossy and dimensional. I then added some Green Patina Perfect Pearls by Ranger, Rusty Hinge Distress Ink and black Versafine Ink to give it an aged look and heated it with my heat gun again so all the elements merged together.

I repeated the layers of the gold Liquitex Ink, Aged Silver Embossing Enamel, Green Patina Perfect Pearls, Rusty Hinge Distress Ink and black Versafine Ink until I achieved the finish that I was after.

I repeated the same process to create the numbers which are also chipboard pieces from Boozybear. Then I attached everything to the page using Ranger Glossy Accents. To finish, I used the glossy accents again to adhere some metal and glass beads so that they look like debris which has come away from the numbers as they fly out from the clock.

Last week after a walk along the green at Lytham with our friends, we stopped by a café called Chell’s of Lytham. As this cafe makes their own ice cream I couldn’t resist having a couple of scoops; the flavours I chose were Sticky Toffee Pudding and Double Chocolate – yummy!

As you can see there was iced water, as well as Earl Grey Tea and Hot Chocolate …

… and as T Stands for Tuesday, I also have a cappuccino to share with the coffee lovers amongst the T Gang – wishing you all a Happy T Day!

Challenges 

I’m glad I found out about Challenge Blogs, like Try it on Tuesday, as I enjoy taking part, they provide me with inspiration for my pages and are a wonderful way to meet like-minded arty people. So here are the challenges I’m joining today:

I’m pleased to join the lovely Alison/Craftytrog and her Geometric Shapes challenge over at Art Journal Journey with the Abstract Grid that I included on my page.

With the steampunk vibe created from the amazing Boozybear chipboard pieces, I am very pleased to be able to join Sandee & amilie’s Steampunk Challenge which is Anything Goes – Steampunk/Industrial – thanks so much for the wonderful Boozybear chippies!

I’m happy to join the Put Your Stamp On It challenge over at A Vintage Journey as I used a set of Tim Holtz stamps for my Steampunk Style inspired page.

Over at Simon Says Stamp Work It Wednesday the challenge is Try Something NEW! so I’m pleased to join this challenge too as I used two new stencils and the Carabelle Studio one was bought at Simon Says Stamp.

Thanks for joining me today! If you have any questions or comments, I would love to hear from you.

Here is a list of all the materials used to create this art journal page:

  • Tim Holtz Distress Ink (Antique Linen, Ground Espresso, Rusty Hinge, Black Soot)
  • Tsukineko Versafine Ink (Onyx Black)
  • Liquitex Heavy Body Acrylic (Neutral Grey)
  • Pébéo White Gesso
  • Tsukineko VersaMark (Watermark Stamp Pad)
  • Liquitex Ink! (Iridescent Bright Gold)
  • Stampendous! Frantage Embossing Enamel Kit (Aged Silver FREK02)
  • Ranger Perfect Pearls (Green Patina)
  • Tim Holtz Collection Stamper’s Anonymous (Documented CMS226)
  • Carabelle Studio Art Template (Trame Tissus et Chiffres TE60034)
  • That’s Crafty! 8x8ins Stencil (Abstract Grid – TC8023)
  • Boozybear Chipboard Pieces (Wind Up Gear CP29, assorted gears and cogs, steampunk wings)
  • Craft Sensations (Brads CRO550/A)
  • The Brighton Bead Shop (Assorted Metal and Glass Beads)
  • Ranger Glossy Accents
  • Liquitex Matte Gel Medium

Creativity and Imagination

I enjoyed using my creativity and imagination to create this industrial looking page and pretty steampunk butterflies. I also had fun raiding my hubby’s tool supplies for the metal pins and washers for this page (grin!). I hope that you like it too!

To create an industrial look, I started by applying modelling paste using a Metal Grid and also a Clock background stencil from That’s Crafty! When the paste was dry, I covered the entire page in Neutral Gray Liquitex acrylic paint. I painted some Iridescent Bright Silver Liquitex Ink over and around the stencilled modeling paste and then I applied some Midnight Sparkle and Silver Grey metallic wax lustres over the top which emphasised the texture and detail of the metal grid and clocks. I also splattered the page with the same silver Liquitex ink and a copper spray to give a grungy look. Once dry, I stencilled roses onto the page using Rusty Hinge Distress Ink and a blending tool positioning them in between the metal grids and clocks. I stamped some cogs/gears using black Archival Ink and a Docrafts Steampunk stamp set and then I splattered the whole page with black DecoArt acrylic paint.

To create my steampunk butterflies I used a wonderful butterfly stamp set from Paperbabe Stamps that I recently won over at the Paperbabe Stamp Challenge. This stamp set allows you to layer all the different butterfly parts so it looks more detailed and realistic, you can even create different butterfly poses to produce flight and movement. As this is my first time using these stamps, I kept it simple and started by stamping the larger wing background layer stamp using Rusty Hinge Distress Ink onto white cardstock. Then I stamped the same cog/gear stamp, that I used on my page, over the top using a VersaMark Watermark stamp pad and covered them with copper Papermania embossing powder. I removed any excess powder and used my heat gun to melt it until it turned glossy. Then I stamped the detailed wing layer stamp from the same Paperbabe Stamp set using the VersaMark ink lining up the stamps so that they fit together, covered the wings with silver Papermania embossing powder and melted it with my heat gun. I cut the butterfly out of the cardstock, edged them with a black Faber-Castell Big Brush marker and outlined the cog/gear detail using a black Derwent Graphik marker so they stood out more. I used a metal split pin, from my hubby’s tool supplies (grin!) to create the butterfly body by simply sliding the paper butterfly into the pin and then I stuck them to the page using Glossy Accents.

The “Creativity” and “Imagination” wording is created using Tim Holtz idea-ology Label Letter stickers which are edged with a Sanguine Faber-Castell Big Brush marker. To finish, I added some copper gems, some metal split lock washers, nuts, and internal tooth lock washers using Glossy Accents to stick them all in place. These metal pieces are from my hubby’s tool kit supplies and I did ask before I used them and I think they add a lovely industrial and steampunk feel to my page (grin!).

I have had a few questions about my art journal pages recently – how I photograph them, do I scan them and what I do with them, do I bind them into a book or journal?

My pages are always photographed outside in the garden in natural light and although I crop the photos to show just the actual page for my blog posts, my pages are actually all contained in a spiral bound pad. Once the journal is complete I make decorative covers on the front and back of the book. I like to look through the pages to remember what I’ve been up to and I also have a book stand in my craft room where a different page is displayed everyday from one of my Art Journals; it’s lovely to look at the page and recall the memories associated with it!

If you want to see and find out more about my art journal books then check out my post here.

As T Stands for Tuesday, I’m joining the T Gang and sharing a recent visit to Dahlia’s Kitchen where we had ice cream milkshakes, I have chocolate or banana milkshakes to choose from – yum! Of course they have other beverages if you would prefer – Happy T Day!

Do you remember this water feature? Well, as promised, I found out what it is…it is an old commercial potato peeling machine that has been mounted on stilts (grin!). Doesn’t it look fabulous up-cycled!

Challenges

I’m glad I found out about Challenge Blogs as I enjoy taking part, they provide me with inspiration for my pages and are a wonderful way to meet like-minded arty people. So here are the challenges I’m joining today:

I’m pleased to join the lovely Bleubeard & Elizabeth from Altered Book Lover, who is hosting the Count your blessings challenge over at Art Journal Journey as I feel very blessed to be able to use my creativity and imagination when creating my art journal pages.

I’m pleased to join the Anything Goes challenge over at Paperbabe Stamps too – thank you for the beautiful stamps!

Over at Stamps and Stencils, their challenge is Industrial/Grungy and I had fun using both stamps and stencils on this page to join their theme.

Using embossing powders to create my butterflies, I’m also joining the How can you resist? challenge over at A Vintage Journey with my Industrial inspired and styled Mixed Media page.

I’m also joining the Anything Goes challenge over at The Artistic Stamper with my Creativity and Imagination art journal page.

I’m pleased to join SanDee & amelie’s Steampunk Challenges for their AnythingGoes – Steampunk/Industrial challenge as I had fun creating this industrial page.

Thanks for joining me today! If you have any questions or comments, I would love to hear from you.

Here is a list of all the materials used to create this art journal page:

  • Pébéo Modeling Paste
  • Liquitex Heavy Body Acrylic (Neutral Gray)
  • Liquitex Ink! (Iridescent Bright Silver)
  • Craf-T Products Luster Rub-ons Kit #4 (Midnight Sparkle, Silver Grey)
  • Michelle Marsden Crafts Scrumptious Precious Metal Spritzer (Copper)
  • Tim Holtz Distress Ink (Rusty Hinge)
  • Ranger Archival Ink (Jet Black)
  • DecoArt Crafter’s Acrylic (Black)
  • Tsukineko VersaMark (Watermark Stamp Pad)
  • Papermania Embossing Powder (Copper, Silver)
  • Faber-Castell Big Brush Pitt artist pen (Black 199, Sanguine 188 B)
  • Derwent Graphik Line Marker (Black 0.05mm)
  • That’s Crafty! Dinky Stencils (Metal Grid Background TC041, Clock Background TC048)
  • Craft Sensations (Deco Stencil Set 154892)
  • Docrafts Creativity Essentials A5 clear stamp set (Steampunk DCE907125)
  • Paperbabe Stamps (Butterfly Pieridae Stamp Set)
  • White cardstock
  • Tim Holtz idea-ology (Label Letters #TH93072)
  • Metal split pins, split lock washers, nuts, internal tooth lock washers
  • Docrafts Forever Friends Adhesive Dome Borders (Opulent FFS351111)
  • Ranger Glossy Accents

Mr. Finch

I’m really enjoyed creating the masculine page that I posted on Tuesday so I thought I would continue with the masculine theme and create a page with the additional inspiration of the goldfinches that we have seen a number of times this year, both in our garden and on our walks. So here’s my fun steampunk page which showcases the fabulous Mr. Finch (grin!).

I started by covering the page with Peeled Paint and Antique Linen Distress Ink using a blending tool and then spritzing the page with water to give a soft covering of colour. While the background was still wet I used a stamp from BoBunny to add the crackle texture mainly around the edges of the page using Hickory Smoke Distress Ink; the wet page blended the inks so the stamp looks smudged in places which I love. Then I used a stencil from Craft Sensations to add the numbers using Frayed Burlap Distress Ink and a blending tool. The black wheels are also stencilled using a Dina Wakley stencil from Ranger and I varied the depth of the Black Soot Distress Ink that I applied to give more of a distressed look and to add some dimension. I then splattered the page with the Black Soot Distress Ink using a paintbrush. The fountain pen and pocket watch are rub-on transfers by Royal and Langnickel and I also applied some leftover black letters from a Letraset transfer set to use them up. Next I fussy cut the roses from some design paper and stuck them in place, like all of the paper elements, using Liquitex matte gel medium.

For my steampunk Mr. Finch, I used a bird stamp from Stampendous, a Steampunk stamp set by Docrafts and black Archival Ink. I started by stamping the bird onto thick paper and fussy cutting it out, and then I distressed this image by covering it with some watered down white gesso using a baby wipe. Once dry I stamped the cog images over his breast and head and also a feather image over his back and wings to add more texture. I also stamped his steampunk style top hat and his wheels onto another piece of design paper; his wheels are from the Penny Farthing stamp which I stamped twice and then fussy cut out. I added three strips of music washi tape horizontally on the page and then I layered his wheels, body and hat together so Mr. Finch is rolling along one of these strips.

Inspired by seeing the goldfinches, I painted his cog design and added detail to his feathers using Iridescent Gold Liquitex Ink. As goldfinches also have red feathers on their heads that look like a mask, I also thought it would be fun to paint the goggles on his top hat with a Poppy Red Derwent Inktense pencil. I used a black Derwent marker, white gel pen and also the gold Liquitex Ink and red Inktense pencil to add further colour and detail to the design including his mask, hat, wheels and cogs. For his eye I added a black gem and coloured some of it white using a Uniball gel pen. Next I die cut three small labels using my Big Shot machine and stamped “Explore” using black Archival Ink. Once stuck in place, I coloured the edges using the red Inktense pencil and gold Liquitex Ink and then outlined them using a black Derwent marker and a white Uniball gel pen to frame the words, and then I embellished them with some round black brads. To finish, I splattered black and white DecoArt acrylic paint and also gold Liquitex Ink using a paintbrush over the page.

Here is one of the goldfinches that we saw on one of our walks along by the sand dunes, isn’t he magnificent!

If you are interested here are some facts about this bird:

  • There are just three species of goldfinches in the world – our European goldfinch, the widespread American goldfinch and Lawrence’s goldfinch which is found in the southwest USA.
  • The European goldfinch is a highly coloured finch with a bright red face and yellow wing patch.
  • They are very sociable birds, often seen in large groups and have a delightful liquid twittering song and call. The collective name for goldfinches is a charm and is derived from the old English c’irm which describes the birds’ twittering song.
  • The shape of their beak allows them to extract seeds from thistles and teasels.

Challenges

I’m glad I found out about Challenge Blogs as I enjoy taking part, they provide me with inspiration for my pages and are a wonderful way to meet like-minded arty people. So here are the challenges I’m joining today:

I’m pleased to join the lovely Gill from gibbyfrogettcraftations who is hosting the Inspired by … challenge over at Art Journal Journey I took inspiration from seeing the goldfinches to create steampunk page.

With the focal image of Mr. Finch being created using different stamps, I’m happy to be able to join Stamping Sensations and their Anything Goes challenge.

I’m so pleased to join the lovely Maura who is on the design team and is co-hosting over at SanDee & amelie’s Steampunk Challenges this month for their Anything Goes – Steampunk/Industrial challenge.

Over at A Vintage Journey this month the challenge is Stencil It so I’m pleased to join this challenge with my goldfinch inspired page fits their challenge focus with its Steampunk and Mixed Media Style.

I’m also pleased to be able to join the Written Word (add some text in some form) challenge over at Country View Challenges with stamped wording I added to this page.

I’m joining in the fun at Simon Says Stamp Monday Challenge and their Anything But A Card challenge with Mr. Finch art journal page.

I’m also joining the Craft Stamper Take It, Make It Challenge and their June Challenge: Anything Goes!: (stamping MUST be included) with my unique, one of a kind Mr. Finch.

Thanks for joining me today! If you have any questions or comments, I would love to hear from you.

Here is a list of all the materials used to create this art journal page:

  • Tim Holtz Distress Ink (Peeled Paint, Antique Linen, Hickory Smoke, Frayed Burlap, Black Soot)
  • Pébéo White Gesso
  • Ranger Archival Ink (Jet Black)
  • Liquitex Inks! (Iridescent Bright Gold)
  • Uni Pin Fine Line marker (Black 0.2mm)
  • Uniball Signo gel pen (White)
  • Faber-Castell Big Brush Pitt artist pen (Black 199)
  • Derwent Inktense Pencil (Poppy Red 0400)
  • DecoArt Crafter’s Acrylic (Black, White)
  • Craft Sensations (Deco Stencil Set 154892)
  • Ranger Dina Wakley Media Stencil (Wheels MDS45588)
  • BoBunny Stamp (Rough it up 12105155)
  • Stampendous Cling Rubber Stamps (Jumbo Songbird CRS5029)
  • Docrafts Creativity Essentials A5 Clear Stamp Set (Steampunk DCE907125)
  • Spellbinders Nestabilities Card Creator (A-2 Fancy Ribbon Threader S5-135)
  • Royal & Langnickel Clear Choice Stamps (Journey MIN- CCS104)
  • American Crafts (DIY Shop)
  • Craft Sensations Design Pad (Soft Colours CRO730/R, Authentic Vintage CRO730/R)
  • Royal & Langnickel Create-A-Collage Rub-on Transfers (Men’s Accessories #ROY-853)
  • Letraset Transfers (Helvetica Bold Condensed 5mm DCO251)
  • Hobbycraft (Assorted Black & White Decorative Tape 5971481007)
  • Poundland (Design Gems 175751)
  • Brads (Round Black)
  • Liquitex Matte Gel Medium